VacPort®
It replaces the dust pan, not the hose.
A VacPort is a small door set low in the wall or the toe kick. Open the door and the vacuum starts. Sweep the dirt straight in and it travels down the pipe to the power unit's dust bag. Nothing plugs into it — the hose goes to an inlet valve, which is a different part. In a coach, where the mess is always at the door and always sand, the VacPort is the one people use most.
The range
Seven VacPorts, LED and non-LED
- A-900-XA-900-X VacPort with LEDSweep inlet with an LED. Black or white.$36.61Add
- A-901-XA-901-X VacPort with LEDSlimmer LED sweep inlet. Black or white.$33.10Add
- A-902-XA-902-X VacPort with LEDLED sweep inlet, single finish.$32.82Add
- A-910-XA-910-X VacPort, no LEDThe same sweep inlet without the light. Black or white.$36.39Add
- A-911-XA-911-X VacPort, no LEDThe value non-LED sweep inlet.$25.53Add
- A-950-XA-950-X Complete Install KitAn A-900-X LED VacPort plus trim plate, P-21 elbow, P-30 coupling, P-41 sweep tee, 3 ft of X640 hose, 6 ft of 22g wire, two wire nuts and the quick-reference manual.$65.96Add
- AF-10AF-10 Fitting Set with VacPortThe full fitting set with an A-900-X LED VacPort included.$75.00Add
Black and white are both stocked on the A-900-X, A-901-X, A-910-X, A-950-X and AF-10 — the button above adds black. For white, call 772.463.1400 or email us and we will send a direct link.
A-950-X
The whole install in one box.
Buying the port and then discovering you need a sweep tee, an elbow, a coupling and six feet of low-voltage wire is how a Saturday job becomes a Sunday job. The A-950-X is the port plus everything around it.
- A-900-X LED VacPort and trim plate
- P-21 elbow, P-30 coupling, P-41 sweep tee
- 3 ft of X640 installation hose
- 6 ft of 22 gauge wire and two wire nuts
- Quick-reference manual
Inlet valves
The standard wall inlet
Where a VacPort is a sweep inlet at floor level, an inlet valve is the conventional port you plug the hose into. Both tie into the same pipe run.
- AS-40-EAS-40 Inlet Valve with ReducerThe valve that ships in the AF-01 set.$18.52Add
- P-01-L-EP-01-L-E Rectangular Inlet Valve3 x 5 in. black wall inlet with the InterVac logo.$9.47Add
- P-10-WP-10-W Inlet Valve, whiteWhite wall inlet valve.$8.36Add
- P-93P-93 Utility ValveUtility inlet valve.$9.97Add
- AS-50AS-50 Flanged Intake FittingFlanged intake fitting for the power unit connection.$8.00Add
Pipe and fittings
The P-series, couplings and installation hose
Everything a piped RoadVac install needs. The AF-01 set is the usual starting point — it covers a straightforward single-valve run.
- AF-01RM Fitting Set1 AS-40-X inlet valve, 1 P-20 elbow, 1 P-21 hose-to-pipe elbow, 2 D-900-E couplings, 1 P-30 coupling and 4 ft of X640 flex hose.$34.43Add
- X640Installation Hose, per ft2 in. flexible installation hose.$6.02Add
- D-900-EThreaded CouplingFor 2 in. installation hose.$6.02Add
- D-915Reducer, female to 2 in.Inlet valve reducer.$4.97Add
- P-20Short ElbowPipe to pipe.$2.75Add
- P-21Hose to Pipe Short ElbowTransition fitting.$3.12Add
- P-22Hose to Pipe Large ElbowLarge transition elbow.$3.71Add
- P-23Large 90 Degree ElbowFemale to female.$2.01Add
- P-25Flanged 90 Degree ElbowExhaust fitting.$3.80Add
- P-2690 Degree Sweep ElbowLong-radius sweep.$1.56Add
- P-2890 Degree Close ElbowTight-clearance elbow.$2.77Add
- P-30Pipe to Pipe CouplingFemale to female.$2.95Add
- P-31Male to Male CouplingCoupling.$1.52Add
- P-36Flanged Straight CouplingPipe to flange.$2.46Add
- P-39Inlet Valve AdapterValve adapter.$1.92Add
- P-40Wye Fitting3-way branch.$7.25Add
- P-41Tee Sweep ElbowSweep tee.$2.68Add
- P-19Mounting Plate, squareFor square inlet valves.$1.97Add
- P-19-AMounting Plate, 3 x 5 in.For 3 x 5 in. inlet valves.$4.15Add
- P-80-ETrim Plate, blackFinish trim.$4.47Add
- P-90Pipe CollarCollar.$2.01Add
- P-91Bushing, pipe reducerSpecial reducer bushing.$0.67Add
- P-92O-Ring Elbow with Pipe SleeveSealed elbow.$0.67Add
Prices are current as of September 2026. Orders over $199 ship free in the continental United States.
Watch it done
Fitting a VacPort
Cutting one into a new wall, and retrofitting one into a wall that is already finished.
Questions
VacPorts and fitment
What is a VacPort?
A sweep-in door set low in the wall or the toe kick, in place of a dust pan. Open the door, the vacuum starts, you sweep the dirt in and it goes down the pipe to the dust bag. You never bend down with a dust pan and you never plug anything in. It is also the one InterVac product that commonly goes on another brand's system.
Does the hose plug into a VacPort?
No. That is the most common misunderstanding about it. The hose plugs into an inlet valve. A VacPort has no hose connection — it is a sweep-in door. Most piped installs fit both, on the same pipe run.
Which RoadVac models take a VacPort?
The CS-9, CS-10, CS-RM and CS-RM-RC. The CS-6 and CS-8 do not — on those the inlet is built into the unit and there is no pipe run to tie a VacPort into.
Will a VacPort work on a different brand of central vacuum?
In most cases yes, which is why we say 'fits most brands' rather than 'fits all'. It needs a 24V AC or DC low-voltage supply. Some central vacuums use a triac and others a transformer, and on 24V DC the wires may need reversing. Manual M-20 covers the wiring.
What is the difference between the LED and non-LED versions?
Only the light. The A-900-X, A-901-X, A-902-X and A-950-X have an LED that shows the port is live; the A-910-X and A-911-X do not. Suction and fitment are identical.
What comes in the A-950-X kit?
An A-900-X LED VacPort, trim plate, P-21 elbow, P-30 coupling, P-41 sweep tee, 3 ft of X640 hose, 6 ft of 22 gauge wire, two wire nuts and the quick-reference manual — the whole install in one box for $65.96.
Do VacPorts need their own bags or filters?
No. A VacPort is an inlet, not a vacuum. The bag and filter belong to the power unit.